查找地点
有关时间、上门服务和预约查找地点
有关时间、上门服务和预约FPG: It is critical that samples for plasma glucose be spun soon after collection. SST tubes should be allowed to clot for about 30 minutes and centrifuged within 45 minutes of collection. If glucose samples are not centrifuged promptly, glucose levels will decrease factitiously.
Within 1 day
Turnaround time is defined as the usual number of days from the date of pickup of a specimen for testing to when the result is released to the ordering provider. In some cases, additional time should be allowed for additional confirmatory or additional reflex tests. Testing schedules may vary.
For more information, please view the literature below.
Whole blood and plasma
4 mL whole blood and entire collection of plasma
4 mL whole blood and 0.5 mL plasma
Hemoglobin A1c: lavender-top (EDTA) tube; green-top (lithium heparin) tube; or gray-top (sodium fluoride) tube
Glucose, Plasma: gray-top (sodium fluoride) tube or green-top (lithium heparin) tube
Hemoglobin A1c: The usual precautions in the collection of venipuncture samples should be observed. The sample must be free of clots. Samples with any hematocrit disorders can lead to erroneous results. Send the entire tube to the laboratory.
FPG: Label specimen as plasma. Mix well.
Maintain A1c and FPG specimens at room temperature.
Temperature | Period |
---|---|
Room temperature | 14 days |
Refrigerated | 14 days |
Frozen | 14 days |
Freeze/thaw cycles | Stable x3 |
A1c: None
FPG: Blood should be drawn in the morning after an overnight fast (no caloric intake for at least eight hours), during which time the individual may consume water.
A1c: clotted specimen; gross hemolysis
FPG: gross hemolysis; improper labeling
Screen for prediabetes and diabetes in asymptomatic adults
Hemoglobin A1c: Any cause of shortened erythrocyte survival will reduce exposure of erythrocytes to glucose with a consequent decrease in Hb A1c (%). Causes of shortened erythrocyte lifetime might be hemolytic anemia or other other hemolytic diseases, homozygous sickle cell trait, pregnancy, or recent significant or chronic blood loss. Glycated Hb F (fetal hemoglobin) is not detected as it does not contain the glycated beta chain that characterizes Hb A1c. Specimens containing high amounts of Hb F(>10%) may result in lower than expected Hb A1c.
A1c: Roche Tina-Quant Hemoglobin A1c which is NGSP certified and standardized to the DCCT reference assay.
Plasma glucose: enzymatic
Hemoglobin (Hb) A1c (%) | Fasting Plasma Glucose mg/dL | |
---|---|---|
Diabetes | >6.4 | >125 |
Prediabetes | 5.7–6.4 | 100–125 |
Glycemic Control for Adults with Diabetes | <7.0 | N/A |
Normal | 4.8–5.6 | 70–99 |
For selected individual patients, providers might reasonably suggest even lower A1c goals than the general goal of <7%, if this can be achieved without significant hypoglycemia or other adverse effects of treatment. Such patients might include those with short duration of diabetes, long life expectancy, and no significant CVD. Conversely, less‐stringent A1c goals than the general goal of <7% may be appropriate for patients with a history of severe hypoglycemia, limited life expectancy, advanced microvascular or macrovascular complications, and extensive comorbid conditions and those with long-standing diabetes in whom the general goal is difficult to attain.
Screening for prediabetes and type 2 diabetes is important in all patients 45 years of age and older and others (see below) because both are common and often have a long, pre-symptomatic stage. Additionally, both conditions meet criteria for which early detection is appropriate and advantageous, especially since simple tests are readily available and effective interventions exist.
Current American Diabetes Association (ADA) testing criteria for prediabetes and diabetes in asymptomatic adults includes:
• All patients 45 years of age or older
• Consider in overweight or obese (BMI greater than or equal to 25 kg/m² or greater than or equal to 23 kg/m² in Asian Americans) adults of any age with one or more of the following risk factors:
- 1st degree relative with diabetes
- High risk race/ethnicity (eg, African American, Latino, Native American, Asian American, Pacific Islander)
- History of CVD
- Hypertension or on therapy for hypertension
- HDL‐C value < 35 mg/dL and/or triglyceride value > 250 mg/dL
- Polycystic ovary syndrome
- Physical inactivity
- Conditions associated with insulin resistance (eg, severe obesity, acanthosis nigrans)
Fasting plasma glucose (FPG), plasma glucose after 75-gram oral glucose tolerance test (OGTT) and hemoglobin A1c (A1c) are equally appropriate assays for prediabetes and diabetes screening. 2018 ADA standards of medical care mandate that two abnormal test results (ie, both FPG and A1c) are needed for diagnosis unless there is a clear clinical diagnosis (ie, random plasma glucose greater than or equal to 200 mg/dL). A single abnormal test can be repeated using a new blood sample for confirmation.
Hemoglobin A1c: Factors such as duration of diabetes, adherence to therapy, and age of patient should also be considered in assessing the degree of blood glucose control.
FPG: Recent evidence revealed diurnal variation in FPG, with mean FPG higher in the morning than in the afternoon, indicating that many cases of undiagnosed diabetes would be missed in patients seen in the afternoon. Glucose concentrations decrease ex vivo with time in whole blood because of glycolysis. For this reason, samples should be centrifuged promptly. The rate of glycolysis, reported to average 5% to 7% [approximately 0.6 mmol/L (10 mg/dL)] per hour, varies with the glucose concentration, temperature, white blood cell count, and other factors. Glycolysis can be attenuated by inhibition of enolase with sodium fluoride (2.5 mg fluoride/mL of blood) or, less commonly, lithium iodoacetate (0.5 mg/mL of blood). These reagents can be used alone or, more commonly, with anticoagulants such as potassium oxalate, EDTA, citrate, or lithium heparin. Although fluoride maintains long-term glucose stability, the rate of decline of glucose in the first hour after sample collection in tubes with and without fluoride is virtually identical. (Note that leukocytosis will increase glycolysis even in the presence of fluoride if the white cell count is very high). After four hours, the glucose concentration is stable in whole blood for 72 hours at room temperature in the presence of fluoride. In separated, non-hemolyzed, sterile serum without fluoride, the glucose concentration is stable for eight hours at 25°C and 72 hours at 4°C.
Glucose can be measured in serum, or plasma, but plasma is recommended for diagnosis. Glucose concentrations in heparinized plasma are reported to be 5% lower than in serum. The reasons for the latter difference are not apparent, but may be attributable to the shift in fluid from erythrocytes to plasma caused by anticoagulants. The glucose concentrations during an OGTT in capillary blood are significantly higher than those in venous blood [mean of 1.7 mmol/L (30 mg/dL), equivalent to 20% to 25%], but the mean difference in fasting samples is only 0.1 mmol/L (2 mg/dL).
Although methods for glucose analysis exhibit low imprecision at the diagnostic decision limits of 7.0 mmol/L [(126 mg/dL), fasting] and 11.1 mmol/L [(200 mg/dL), post-glucose load], the relatively large intraindividual biological variability (Coefficients of variation of approximately 5% to 7%) may produce classification errors.
Order Code | Order Code Name | Order Loinc | Result Code | Result Code Name | UofM | Result LOINC |
---|---|---|---|---|---|---|
090400 | Diabetes Risk Asymptom Adults | 001818 | Glucose, Plasma | mg/dL | 1558-6 | |
090400 | Diabetes Risk Asymptom Adults | 001481 | Hemoglobin A1c | % | 4548-4 |
© 2021 Laboratory Corporation of America® Holdings and Lexi-Comp Inc. All Rights Reserved.
CPT Statement/Profile Statement
The LOINC® codes are copyright © 1994-2021, Regenstrief Institute, Inc. and the Logical Observation Identifiers Names and Codes (LOINC) Committee. Permission is granted in perpetuity, without payment of license fees or royalties, to use, copy, or distribute the LOINC® codes for any commercial or non-commercial purpose, subject to the terms under the license agreement found at https://loinc.org/license/. Additional information regarding LOINC® codes can be found at LOINC.org, including the LOINC Manual, which can be downloaded at LOINC.org/downloads/files/LOINCManual.pdf